Country: 195.20.13.151, Europe, FR

City: 2.3387 , France

This is a very nice set. These are pretty heavyweight and I am guessing stainless steel. Comes with an instruction flyer to let you know which tool to use with which blemish. Each tool is held in place with a loop which is secured to the zippered case. These make extracting a blackhead or whitehead so much easier and you actually get all of the oil out. It will leave a little mark but it goes away a lot faster then forcing it out with your fingers. Always disinfect the area you worked on as well as the tool you used.

Could be a great party light... IF other colors worked besides red. When I plug in the light, only the red color works!!!!

I bought this based on the glowing reviews for this mount, however I'm not too happy with the mount. The first problem is the instructions ask you to drill a 7/32 hole for the lag bolts however the lag bolts that were included in my kit were too small for the 7/32 hole and one of them stripped out completely. I had to drop the mount down a few inches and redrill smaller holes and the lag bolts grabbed perfectly. The second issue I encountered was the instructions tell you to use washers when mounting the plate to the back of the TV. The only washers that would fit are used when you mount the arm to the wall, this lead to a trip to the hardware store for the correct washers. I have one of their tilt wall mounts also and it is awesome, but this kit I do not recommend. This mount is no where near as stable and the TV seems to bounce for a long while after you touch it.

I just recently download the software and began studying RIGHT away! It definitely is designed to help simulate what test day will be like. I am not going into test blindsided. THANK YOU CRACK THE DAT TEAM!